Forklift Jib Attachments usually slide straight over your existing Forks on your Forklift and are either chained back to the carriage or hard pinned to the back of the fork tynes / forks. They not only give you a safe single hook that shares the load along the fork lengths but can give you added lifting height by using a Tilting Jib or extended lifting capacity by using a Telescopic Forklift Jib Attachment. Built to meet NZ Standards with delivery available across New Zealand.
FJCS4.5 Compact Short 4.5 Tonne Jib Attachment is designed as an affordable general purpose forklift Jib able to manoeuvre in confined spaces, with a 1.925m reach when fully extended. Supplied with safety swivel Hook and Shackle.
Converts forklift into a mobile crane in seconds. Adjustable along the length of the fork. Secured to forks by thumb screw. Swivel hook with safety latch.
The FJS (Short 2.5 Tonne Jib) is a general purpose jib at an affordable price. Able to manoeuvre in a confined space, with the ability to extend out to 2.0m. Simply slide on to the fork tines and secure with safety chain.
The FJL (Long 2.5 Tonne Jib Attachment) range of jibs enables long lifts to 3.5m with ease and safety. With 8 lifting points from 950mm through to 3500mm.
Converts forklift into a mobile crane in seconds. Adjustable along the length of the fork. Secured to forks by thumb screw. Swivel hook with safety latch.
The FJL (Long 5.0 Tonne Jib Attachment) range of jibs enables long lifts to 3.5m with ease and safety. With 8 lifting points from 950mm through to 3500mm.
Converts forklift into a mobile crane in seconds. Adjustable along the length of the fork. Secured to forks by thumb screw. Swivel hook with safety latch.
This forklift attachment makes lifting 1000kg bags very easy as the operator does not have to leave his Forklift to load & unload. It also enables extra lift height to get over hoppers or sides of trailers. A large hook easily visible to the driver makes it easy to guide the hook through the loops on the bag. The big bag lifter comes complete with a chain to secure the jib to the forklift and a pin to lock the boom into 1 of 5 different height extensions.
A two prong Bulk Bag lifter for container loading. This is mounted to the Fork Carriage of a forklift so it then becomes dedicated to bag handling. This attachment gives increased lift height as the prongs are set above the carriage plate. The bags are picked up by simply pushing a prong through the loops on each corner of the bag so the operator need not leave their seat to disengage the bag.
Converts forklift into a mobile crane in seconds. Adjustable along the length of the fork. Secured to forks by thumb screw. Swivel hook with safety latch.
The type FJL10 Fixed Jib (Long) is designed as an affordable general purpose jib suitable for larger Forklifts with a 3.56 metre reach when fully extended, allowing for long reach lifts. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain. Supplied with safety swivel Hook and Shackle.
The FJS (Short 5.0 Tonne Jib) is a general purpose jib at an affordable price. Able to manoeuvre in a confined space, with the ability to extend out to 2.0m. Simply slide on to the fork tines and secure with safety chain.
The Slip-On Bulk Bag Jib attachment is designed with 4 lifting hooks to handle standard Bulk Bags. The straps of bulk bags are fastened to the four hooks in either corner of the spreader frame preventing the Bulk Bag from folding in on itself or bunching up as the bag is emptied. Includes certification plates, Manual & Certificate, a safety chain to secure it to the fork carriage and four Heavy Duty swivel hooks. Finished in Safety Yellow Paint.
The type TJL Tilt Jib (Long) is one of our most versatile Forklift Jib attachments in our range, allowing extra height to 2.23m, with a 3.53m reach when fully extended. Simply slide onto the Fork Tines and secure with Safety Chain.